API 4380G - DC to DC Isolated Transmitter - Field Configurable

OVERVIEW

DC Voltage Input: 0-50 mV to 0-10 V
• DC Bipolar Voltage Input: +/- 50 mV to +/- 10 V
• DC Current Input 0-1 mA to 20 mA
• DC Output: 0-1 V, 0-5 V, 0-10 V, +/- 5 V, +/- 10 V, 4-20 mA, etc.
• Field-Configurable by Use

Typical applications include signal isolation, signal conversion, signal boosting or a combination of the three. 

The optical isolation between input and output makes this module useful for ground loop elimination, common mode signal rejection or noise pickup reduction. The module power supply is isolated, resulting in full 3-way (input, output, power) isolation.

The API 4380 G can be field-configured via external rotary and slide switches.

Most common ranges are built-in, and can be selected from the table on the module, however virtually unlimited combinations are possible. Consult the factory for assistance with special ranges.

API exclusive features include two LoopTracker LEDs and a Functional Test Pushbutton. The LoopTracker LEDs (Green for input, Red for output) vary in intensity with changes in the process input and output signals. Monitoring the state of these LEDs can provide a quick visual picture of your process loop at all times. The functional test pushbutton provides a fixed output (independent of the input) when held depressed. The test output level can be field-adjusted via a multiturn potentiometer.

Both the LoopTracker LEDs and functional test pushbutton greatly aid in saving time during initial startup and/or troubleshooting. The built-in 18 VDC unregulated loop excitation power supply can be used to power passive input devices.

The API 4380 G plugs into an industry standard 8-pin octal socket sold separately. Sockets  API 008 and finger-safe  API 008 FS allow either DIN rail or panel mounting.

Options:

API Module Power Options
API Plug In Mounting Socket
API Response Time
SKU
API-4380G
Availability
1 Week
0
Price
$369.00
Add to Cart

TECHNICAL SPECIFICATIONS

Input
Field RangeableVia external rotary & slide switches
Voltage: 0-50 mVDC to 0-10 VDC
or
Bipolar Voltage: +/- 50 mVDC to +/- 10 VDC
or
Current: 0-1 mADC to 0-20 mADC

Output
Field RangeableVia external rotary & slide switches
Voltage: 0-1 VDC to 0-10 VDC
or
Bipolar Voltage: +/- 1 VDC to +/- 10 VDC
or
Current (20 V compliance): 0-1 mADC to 0-20 mADC

Isolation
Full 2000 Vrms Input/Output/Power Isolation

Features
1 minute setup for hundreds of I/O ranges
I/O LoopTracker LEDs
Output test button
18 V loop power supply
Uses API-008 8-pin socket
115 VAC powered
D option for 9-30 VDC power
DF option for Fast Response Time

Applications
Isolate, convert, boost, rescale process signals
Interface process signals with panel meters, recorders, recorders, data acquisition systems, PLCsDCS & SCADA systems

DOCUMENTS & DOWNLOADS

api_4380g.pdf344.21 KB

VIDEOS

No Result Found

PRODUCT NUMBERS