GH-750 D/E/I Series LVDT Overview

The GH-750-D/E/I series of AC Spring Loaded Linear Position Sensors offer reliable long-life operation utilizing LVDT linear variable differential transformer technology.

GH-750-D/E/I series LVDTs are versatile devices that are used in a wide range of commercial and industrial gauging applications, including Laboratory R&D Materials Testing, Industrial Gauging Test Stands, & Factory Automation.

The sensor shaft of the GH-750-D/E/I series LVDT is spring loaded and guided by a pair of precision sleeve bearings. These hermetically sealed sensors are constructed entirely of stainless steel and are resistant to dust, water, temperature, shock, and vibration. For the air-extend option, the shaft is

extended by introduction of a low pressure (10-30 psi), clean, dry air supply, with a regulated flow, through a ¼” barbed fitting on the end of the unit.

The GH-750-D/E/I Series contains three gauging probe body options to suit the needs of your application. Choose from the GH-750 with an axial connector. The GHR-750 with a right angle connector, or the air-extended GHRA-075 with a right angle connector.

GH-750-D/E/I Series Gauging Probes are available in the following measuring ranges:

These rugged DC LVDTs are built with internal amplifier electronics, so no external signal conditioner is required.

The “D” series is internally amplified with a +/- 10 VDC output.

The “E” series is internally amplified with a 0 to 10 VDC output.

The “I” series is internally amplified with a 4 to 20 mA output.

Click the link below to shop GH-750 D/E/I Series LVDT Sensors!

GH-750 D/E/I Series LVDT Sensor

Page Categories
Video Categories