How to use the DPG-SD series gauge Max Temperature Value Hold function

Once the gauge is powered on we are ready to begin the procedure.

Begin by placing the gauge into the Max Temperature Value Hold mode.

This is accomplished by pressing the RIGHT ARROW KEY once (1x)

The blue MAX LED will illuminate, signifying that the gauge is now in the Max Temperature Value HOLD mode.

For this example, the monitored temperature value will increase from 100 degrees to 500 degrees.

Notice that the gauge tracks the temperature value as it increases to 500 degrees.

As the temperature value decreases back to 100 degrees, the gauge display retains the max temperature value of 500 degrees.

The max temperature value will remain on the gauge’s display until the Max Value memory is cleared.

To clear the Max Value memory, press & hold the UP ARROW key for 4 seconds.

To return the gauge to the normal operating mode, press the RIGHT ARROW KEY once (1x) and the blue MAX LED will extinguish.

Click the links below to order a DPG-SD Gauge today!

DPG-SD Single Channel Gauge


DPG-SD Dual Channel Gauge

Page Categories
Video Categories